Front-end terminal and single battery in communication station
Front-end terminal and single battery in communication station
Is it difficult to carry out on-site installation and maintenance due to the installation of single battery? Does your battery fail because there is no additional ventilation source? Have you considered installing front-end batteries at communication sites?
New call words
First of all, what is the front-end battery?
The battery is an ultra-thin battery with positive and negative terminals at one narrow end of the battery.
The voltage divider is located on the junction box of the battery to minimize the possibility of accidental short circuit of the battery and separate the positive and negative terminals.
A small hole can also be seen near the terminal block; This is for external ventilation. If the battery is placed in a closed area, any gas released by the battery may damage the equipment or instrument, and it will start to operate.
Then, the complete junction box is covered and protected by a plastic cover specially designed for installing the battery.
External ventilation
Why use front-end terminal configuration?
There are several reasons why the front-end battery series is very suitable for installation in the 19 "rack of communication, UPS and other mission-critical power applications.
1. Easy to install and maintain
The terminals are located on the front of the battery, which means they are easy to install and maintain.
Consider carrying out voltage test, impedance reading and torque check on the side before installation, rather than going deep into the battery system, because technicians may be injured and cannot touch the opposite battery terminals.
Test the Financial Times
2. Professional installation
The slim design allows the front-end terminal battery to be neatly installed in a 19-inch rack. The front-end battery operates well in the communication 32RU cabinet, providing a clean and professional installation.
Being able to easily install these cabinets means that you can save money in the next installation, because you don't have to replace the cabinets!
3. Additional exhaust - reduce the chance of problems
The front battery can be ventilated externally. If they are installed in the 32RU cabinet with other sensitive equipment, any gas released by the battery will be discharged to the outside to prevent damage to the equipment. At present, this external ventilation option is not available in VRLA single cells.
4. Provide the link between terminal cover and battery
All batteries are equipped with terminal covers and terminal links between batteries. The site will not be confused to find additional battery components. These terminal covers and inter-battery connectors are specially designed and manufactured for the front-end terminal battery series.
Is it difficult to carry out on-site installation and maintenance due to the installation of single battery? Does your battery fail because there is no additional ventilation source? Have you considered installing front-end batteries at communication sites?
New call words
First of all, what is the front-end battery?
The battery is an ultra-thin battery with positive and negative terminals at one narrow end of the battery.
The voltage divider is located on the junction box of the battery to minimize the possibility of accidental short circuit of the battery and separate the positive and negative terminals.
A small hole can also be seen near the terminal block; This is for external ventilation. If the battery is placed in a closed area, any gas released by the battery may damage the equipment or instrument, and it will start to operate.
Then, the complete junction box is covered and protected by a plastic cover specially designed for installing the battery.
External ventilation
Why use front-end terminal configuration?
There are several reasons why the front-end battery series is very suitable for installation in the 19 "rack of communication, UPS and other mission-critical power applications.
1. Easy to install and maintain
The terminals are located on the front of the battery, which means they are easy to install and maintain.
Consider carrying out voltage test, impedance reading and torque check on the side before installation, rather than going deep into the battery system, because technicians may be injured and cannot touch the opposite battery terminals.
Test the Financial Times
2. Professional installation
The slim design allows the front-end terminal battery to be neatly installed in a 19-inch rack. The front-end battery operates well in the communication 32RU cabinet, providing a clean and professional installation.
Being able to easily install these cabinets means that you can save money in the next installation, because you don't have to replace the cabinets!
3. Additional exhaust - reduce the chance of problems
The front battery can be ventilated externally. If they are installed in the 32RU cabinet with other sensitive equipment, any gas released by the battery will be discharged to the outside to prevent damage to the equipment. At present, this external ventilation option is not available in VRLA single cells.
4. Provide the link between terminal cover and battery
All batteries are equipped with terminal covers and terminal links between batteries. The site will not be confused to find additional battery components. These terminal covers and inter-battery connectors are specially designed and manufactured for the front-end terminal battery series.